Asante Technologies 5324 - Manual (Page 95)

Configuring RMON Parameters
Page 7-3
Configuring
RMON
Parameters
▲
Important: A knowledge of RMON is strongly
recommended to configure these parameters.
To view and configure RMON parameters via the IntraSwitch’s
Local Management Interface:
1 Access the IntraSwitch’s Local Management
Interface.
▲
Important: Refer to Chapter 3, “Setting
Up For Management” for instructions on
how to connect to the Local Management
Interface.
2 Type c from the Main Menu.
The “Enter Password” prompt appears.
3 Type your password at the prompt, then press
return.
4 Type m to open the RMON Parameters menu.
The following menu appears:
Figure 7-1 RMON Parameters Menu
From this menu you can access three submenus:
❏ RMON History Group — page 7-4
❏ RMON Alarm Group — page 7-9
❏ RMON Event Group — page 7-15