Eap-peap settings – AMX Modero MVP-5200i User Manual

Page 85

Text mode
Original mode

Protected Setup Pages

MVP-5200i Modero Viewpoint Widescreen Touch Panel

EAP-PEAP Settings

Press the EAP-PEAP button to open the EAP-PEAP Settings page (FIG. 67).

PEAP (Protected Extensible Authentication Protocol) was developed as a way to securely transmit
authentication information, such as passwords, over a wireless network environment. PEAP uses only
server-side public key certificates and therefore does not need a client (panel) certificate which makes
the configuration and setup easier.

There are two main versions of the PEAP protocol supported by panel’s DeviceScape Wireless Client:

PEAPv0

PEAPv1

PEAP uses inner authentication mechanisms supported by the DeviceScape Wireless Client, the most
common of which are:

MSCHAPv2 with PEAPv0

GTC with PEAPv1

FIG. 67

Wireless Settings page - EAP-PEAP Settings