beautypg.com

Appendix a: text formatting, Text formatting codes for bargraphs/joysticks – AMX Modero MVP-5200i User Manual

Page 167

background image

Appendix A: Text Formatting

159

MVP-5200i Modero Viewpoint Widescreen Touch Panel

Appendix A: Text Formatting

Text Formatting Codes for Bargraphs/Joysticks

Text formatting codes for bargraphs provide a mechanism to allow a portion of a bargraphs text to be
dynamically provided information about the current status of the level (multistate and traditional). These
codes are entered into the text field along with any other text.

The following is a code list used for bargraphs:

By changing the text on a button (via a VT command), you can modify the codes on a button. When one
of the Text Formatting Codes is encountered by the firmware, it is replaced with the correct value. These
values are derived from the following operations:

Given a current raw level value of 532, a range low value of 500, and a high range value of 600, the
following text formatting codes would yield the following strings as shown in the table below:

Bargraph Text Code Inputs

Code

Bargraph

Multi-State Bargraph

$P

Display the current percentage of the
bargraph (derived from the Adjusted
Level Value as it falls between the
Range Values)

Display the current percentage of the
bargraph (derived from the Adjusted
Level Value as it falls between the
Range Values)

$V

Raw Level Value

Raw Level Value

$L

Range Low Value

Range Low Value

$H

Range High Value

Range High Value

$S

N/A

Current State

$A

Adjusted Level Value (Range Low Value
subtracted from the Raw Level Value)

Adjusted Level Value (Range Low Value
subtracted from the Raw Level Value)

$R

Low Range subtracted from the High
Range

Low Range subtracted from the High
Range

$$

Dollar sign

Dollar sign

Formatting Code Operations

Code

Operation

$P

(Current Value - Range Low Value / Range High Value - Range Low Value) x 100

$V

Current Level Value

$L

Range Low Value

$H

Range High Value

$S

Current State (if regular bargraph then resolves to nothing)

$A

Current Value - Range Low Value

$R

Range High Value - Range Low Value

Example

Format

Display

$P%

32%

$A out of $R

32 out of 100

$A of 0 - $R

32 of 0 - 100

$V of $L - $H

532 of 500 - 600