GReddy TURBO KITS: Honda S2000 (AP2) 2004-06 / T518Z - Manual (Page 22)

― ２２―
3-11 Airinx Installation
(1)
Remove the top bolt on the Airinx kit, remove the
outer frame, then the filter. Install the rubber hose
adapter to the base of the Airinx kit.
〈
Parts used: 16
，
17
〉
(2)
Reassemble the Airinx filter, hand tighten the top
bolt.
(3) ３ ３ ３ ３－ － － －
10(2) Install the Airinx filter onto the suction
pipe S-1, secure it with hose band #58.
〈
Parts used: 58
〉
3-12 Factory Heat shield Modification
(1)
Cut the factory heat shield as shown
。
(2)
Mount the modified heat shield back onto the
chassis using factory bolts.
※
Apply paint or rust stop to the edge of the heat
shield where it was cut to keep the exposed raw
metal from rusting.
Use the proper safety equipment
when modifying the heat shield. Note Note Note Note Ａ