GReddy TURBO KITS: Honda S2000 (AP2) 2004-06 / T518Z - Manual (Page 16)

― １６―
(3) Remove the secondary air control solenoid valve
hoses from the hard lines and take note which
hose goes to which hard line. Attach the
secondary air control solenoid valve to the
provided bracket #68 using the provided M5
nut/bolt #82, then install the bracket onto the
chassis cross bar using the OEM bolt.
〈
Parts used: 68
，
82
〉
(4) Connect the
５φ
hose routed under the fuel pipe
to the vacuum tank IN side
【Ａ】
(hose with check
valve). Also connect the lower
５φ
pipe to the
air control solenoid valve
【Ｂ】
using the provided
hose
（７００㎜
cut
）
.
※
Make sure the hoses are secured to prevent them
from touching the engine belts.
〈
Parts used: 43
，
80
〉
(5) Secure the hoses with cable ties.
① 【 Ａ 】 ５ φ
hose at the upper pipe and check
valve.
②
Intake Manifold and lower
５φ
pipe.
〈
Parts used: 80
〉
№68
Sec. Air Control Valve
Ａ Ａ Ａ Ａ
Ｂ Ｂ Ｂ Ｂ
Ｃ Ｃ Ｃ Ｃ