DAVIS DriveRight Installation - GD (All DriveRight Models) - Manual (Page 2)

1
1. C ONTENTS OF P ACKAGE
1. DriveRight display
2. Battery (CR123 3V Lithium)
3. Coiled cable extension
4. Harness cable
5. Visor clip
6. Mounting bracket
7. 6-32 x 1/2” flat head machine screw (3)
8. #6 x 1/2” flat head self-tapping screw (3)
9. #6 split lock washer (6)
10. #6 flat washer (6)
11. 6-32 nut (3)
12. Right angle adapter bracket
13. #6 x 1/2” pan head self-tapping screw (3)
14. Double-sided foam tape (2 each)
15. VELCRO
® tape (2 pair)
16. Red +12v wire with fuseholder (22 AWG)
17. Fuse (3AG 1-1/4” x 1/4”, .25A, SLO-BLO)
18. Black ground wire (22 AWG)
19. Spade terminal (2)
20. In-line splice (3)
21. Butt splice (26-22AWG or 24-20AWG) (5)
22. Magnet
23. Magnet mount
24. Large tie wrap (2)
25. Speed sensor with leads
26. 1/2” brass hex nut (2)
27. 3/8” flat washer
28. 3/8” internal tooth lock washer
29. Sensor mounting bracket
30. Support bracket
31. #14 x 3/4” self-tapping screw (4)
32. 1/4-20 x 3/4” hex head machine screw
(5)
33. 1/4” split lock washer (5)
34. 1/4” flat washer (5)
35. 1/4“-20 nut (5)
36. Split flexible tubing
37. Small tie wraps (8)
Figure 1: DriveRight Parts