DAVIS FMS DriveRight Database Selection Guide (8186) - Manual (Page 18)

18
Appendix B: Configuring Oracle Database Manually
If a direct configuration of the database files on the Oracle server can not be
permitted, the database can be configured manually by using the following
instructions. The SQLPlus command utility should be installed to run the script.
1. Go to Start->Run.
2. Type cmd and click OK. The DOS command window displays.
3. Change the directory by entering the following in the command line:
cd C:\Program Files\DriveRight
4. Enter the following in the command line:
DriveRight_DBConfig_Oracle.bat YourUserName YourPassword
YourServiceName
YourUserName, YourPassword, and YourServiceName should be replaced with
your Oracle user name, your password and your TNS service name
(DRight.your_company_name.com) respectively. These parameters are used
to connect to the Oracle database.
5. Wait for the script to finish and open DriveRight_DBConfig_Oracle.log file
under the C:\Program Files\DriveRight directory to check for any errors.
Report errors to Davis Instruments.