DAVIS Weather Envoy (6316, 6316C) - Manual (Page 22)

Contacting Davis Technical Support
20
the entry rather than showing invalid data. You can use the record editor to
correct these entries.
? The data I want to see, such as solar radiation, soil moisture, or Temp 2 does not
display. Why?
All optional sensors must be enabled in the Station Configuration dialog box
before the data will be displayed in WeatherLink. If you are not seeing data
from a sensor that is installed in your weather station, be sure check the
Station Configuration in the Setup Menu and make sure the sensor has been
selected.
Contacting Davis Technical Support
If you have questions about the Envoy, or encounter problems installing or
operating the Envoy, please contact Davis Technical Support.
(510) 732-7814 – Monday – Friday, 7:00 a.m. – 5:30 p.m. Pacific Time.
(510) 670-0589 – Technical Support Fax.
[email protected] – E-mail to Technical Support.
[email protected] – General e-mail.
www.davisnet.com – Copies of User Manuals are available on the
“Support” page. Watch for FAQs and other updates. Subscribe to the
e-newsletter.