DAVIS Vantage Pro2 Quick Reference Guide User Manual

Page 8

DIAGNOSTICS

The diagnostic screen is used by our tech support staff to help diag-

nose problems. If you experiencing difficulties call us at

(510) 732-7814,

Monday through Friday, 7:00 a.m. to 5:30 p.m., Pacific Time.

To check reception and/or change antenna gain:
1. To enter the diagnostic screen, press and hold

TEMP and then press

HUM . You will see console battery voltage in the ticker tape.

2. Look for the number with the % sign in the middle of the top row. A

number >= 70% is good or excellent. If the number you see is < 70%,

try changing the gain or relocating the console. Sometimes moving the

console just a few feet can make a big difference.

3. Press

CHILL to toggle between diagnostic screen displays.

4. To exit the diagnostic screen, press .

To set an alarm:
1. Press

ALARM to enter the alarm screen. The icon will appear on

the screen. In each field, you will either see the alarm setting or, if no

alarm has been set, a series of dashes.

2. Press

TIME or a weather variable key, or use ( + ), ( – ), ( < ), or

( > ) to move between weather variables. Except for the time alarm, the

graph icon displays next to the variable you have selected.

3. Press

HI/LOW to switch between high and low alarms. (Note: Not

all alarms are available for all weather variables. See Vantage Pro2

Console Manual for details.)

4. Press

SET to enter or change an alarm setting. Use ( + ) or

( – ) to change the digit within a field. Use ( < ) or ( > ) to move to the

next field.

5. Press

DONE to accept the alarm setting. Repeat steps 2–4 to set

another alarm, or press

DONE again to exit the alarm screen.

The SET key is also used to enter selected daily, monthly, and

yearly totals and to calibrate selected readings. (See Console Manual.)

DONE