DAVIS Vantage Pro Quick Reference Guide - Manual (Page 4)

DONE HI/LOW
Press DONE to:
•
Accept an alarm setting.
•
Exit the alarm screen.
•
Silence an alarm.
•
Exit the graph screen
•
Exit the high/low screen.
•
Go to the next message in the setup screen.
Press and hold DONE and then press ( −− ) to:
•
Enter the setup screen.
Press and hold DONE to:
•
Exit the setup screen.
To enter the high/low screen: Press HI/LOW . You will see the
time & date of the DAY HIGHS for the currently selected weather vari-
able, along with a graph showing the highs for the last 24 hours or days.
To view a different weather variable, press the key(s) for that
variable.
To scroll between highs & lows: Press HI/LOW or ( + ) or ( −− )
to scroll between:
Day Highs • Day Lows
Month Highs
•
Month Lows
Year Highs
•
Year Lows
The time and date will change as you move between the various highs
and lows. (NOTE: Not all highs and lows are available for all weather
variables. See Console Manual for details.)
To go back or forward in time: Press ( < ) or ( > ). The time and
date will change and the corresponding dot on the graph will flash.
To exit the high/low screen: Press DONE .
To clear highs & lows: See "CLEAR."
14 19
CLEAR LAMPS
To clear a daily, monthly, or yearly amount:
1. Select the variable you wish to clear.
2. Press 2
ND then CLEAR , holding CLEAR down until the digits
stop flashing and zeroes appear in the field.
To clear an alarm setting:
1. Press 2
ND & ALARM to enter the alarm screen.
2. Select the alarm setting (see "ALARM" for detailed instructions).
3. Press 2
ND , then CLEAR , holding CLEAR down until the digits
stop flashing and dashes appear in the fields.
4. Press DONE to return to the current weather screen.
To clear highs & lows:
Follow the directions above for clearing alarms, except press HI/LOW
to enter the high/low screen.
To clear ALL (including highs and lows, alarm settings, and daily,
monthly, and yearly amounts):
1. Press WIND .
2. Press 2
ND then CLEAR , holding CLEAR down for the entire six-
second countdown until you see CLEARING NOW in the ticker tape.
Press 2 ND & LAMPS
to toggle between:
• Backlight on.
• Backlight off.
If the console is running on AC power:
•
The backlight will remain on until you turn it off.
If the console is running on battery power,
•
The backlight will remain on as long as you continue pressing various
keys or a ticker tape message is scrolling across the screen. It will
automatically turn off if you do not press a key within ten seconds.
• The backlight will not come on when battery power is low.
12 21
BAR RAIN YR
Press BAR to select:
•• Barometric Pressure (0.00 in, 0.0 mm, 0.0 hPa, 0.0 mb)
Press 2
ND & UNITS
to change unit of measure.
To correct for elevation change:
1. Press and hold DONE and then press (
−−) to enter the setup screen.
2. Press DONE nine times or until you see ENTER ELEVATION.
3. Press 2 ND & UNITS to change from feet to meters, if desired.
4. Press ( + ) or (
−− ) to change the flashing digit. Press ( < ) or ( > ) to
move between fields.
5. Press and hold DONE to return to the current weather screen.
Barometric Trend Arrow shows change over the last three hours:
Increase of 0.06" Hg (2.0 hPa, 1.5 mm Hg) or more.
Increase of 0.02" Hg (0.7 hPa, 0.5 mm Hg) or more.
Change of less than 0.02" Hg (0.7 hPa, 0.5 mm Hg).
Decrease of 0.02" Hg (0.7 hPa, 0.5 mm Hg) or more.
Decrease of 0.06" Hg (2.0 hPa, 1.5 mm Hg) or more.
Press RAIN YR to toggle between:
•
Rain Month (0.00 in, 0.0 mm)
•
Rain Year (0.00 in, 0.0 mm)
•
Rain Rate (0.00 in, 0.0 mm)
Press 2 ND & UNITS to change unit of measure.
All rain and ET readings will read in the same unit of measure. Chang-
ing one from 0.00 inches to 0.0 mm (or vice versa) changes all others.
When it is currently raining:
will appear between the rain day and rain year fields.
On the ticker tape:
LAST 15 MIN OF RAIN . . . will appear in the ticker tape when you are
displaying rain rate.
10 23