DAVIS Vantage Connect Retrofit Kit (6626) - Manual (Page 9)

7
Download Data From WeatherLink Network to PC
You can download your data stored online to your PC through the WeatherLink
software. This can be done manually, or you can set up automatic downloads in
WeatherLink software. If you choose manual downloads, be aware that the server
will store four times the amount of data as your data logger alone. The amount of
data stored depends on the update interval of your service plan. Be sure to down-
load within the time period below for your service plan.
To set up a communication link between WeatherLink software and your
WeatherLink.com account:
1. In WeatherLink software, under the Setup menu, select Communication Port.
Select TCP/IP.
2. Click on Web Download and then enter your weatherlink.com user ID and
password.
3. Click OK to exit.
To set up automatic downloads:
1. In the WeatherLink software, under the Setup menu, select Auto Download.
2. Choose the station name, then Add.
3. Choose how often to download (from once an hour to once a day).
4. Click Save.
To manually download:
1. In the WeatherLink software, under the File menu, select Download to
download data.
See WeatherLink software’s Help for more information.
Setting E-mail Alerts
You can set up e-mail alerts for console alarm conditions. You will receive an e-
mail when the alert conditions begin and another when the alert conditions end.
You can receive up to 10 sets of start/stop e-mail alerts per day (midnight-to-mid-
night) when alarm conditions occur.
To set up e-mail alerts:
1. Log on to your WeatherLink.com page.
2. Click E-mail Settings.
3. In the Alarm Summary box, check the Enable box and enter your e-mail
address.
5-minute plan 1 month
15-minute plan 3 months
60-minute plan 1 year