DAVIS WeatherLink Getting Started Guide - Manual (Page 12)

10
Communication Port Settings
By selecting the Walkthrough process, the software displays a series of dialog
boxes. At each step in the Walkthrough process, confirmation boxes are pro-
vided to perform or skip the next step in the Walkthrough. To continue, select
OK. To skip this step and move to the next step, select Skip. To cancel the
entire walkthrough process, select Cancel.
Note: Please refer to the WeatherLink Online Help for more information about the complete
Walkthrough process.
Communication Port Settings
WeatherLink contains a dialog box for configuring the communication settings
for your serial or modem configuration. Use the Communications Port dialog
box to select the communications type and to test communication between the
computer and the station.
1. Select Communications Port from the Setup menu or use the
Walkthrough to display the dialog box.