Telenav for Sprint Supported Devices: v5.2 for Samsung M500, M610; Sanyo M1, SCP-8400, Katana 6600 - Manual (Page 34)

© TELENAV, INC. 2003-2007 PAGE 34 OF 73
• Delay - Total time delay caused by traffic conditions, or the sum of delays on each segment.
NOTE: Delay refers only to the route currently shown.
• Dist. - Distance of road segment.
NOTE: This is not the distance from the origin but the length of each road segment.
• Street - The street or highway name of the road segment.
• Mph/Kmph - Average speed on that road segment.
NOTE: “N/A” is displayed for segments farther than 200 miles away.
TIP: Press the Talk key to hear incidents for a selected segment.
If you click on an incident line, you can view the drilldown details. Below is
an explanation of what you will see on the Traffic Details screen:
• Delay - The additional time it will take to travel the segment as
compared with the time it would take if traveling at the posted
speed.
• Travel Time - Estimated time it will take to travel the segment.
• Slowest Speed - Slowest speed observed on the segment.
• Average Speed Bar - Average speed of a segment on a scale
of 0 to the maximum-posted speed for that segment.
• Incident Detail - Each incident is displayed with the following:
-Incident icon color-coded by severity
-Location
-Additional comments
NOTE: If there is no flow information for a segment, the Average Speed bar
on the Details page is grayed out.
TIP: Press the AVOID right softkey to find a new route that avoids this
segment.