Accton Technology ES4512C - Manual (Page 48)

Configuring the Switch
3-10
3
CLI – Specify the hostname, location and contact information.
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports and SFP slots.
• Hardware Version – Hardware version of the main board.
• Internal Power Status – Displays the status of the internal power supply.
Console(config)#hostname R&D 5 4-25
Console(config)#snmp-server location WC 9 4-113
Console(config)#snmp-server contact Ted 4-113
Console(config)#exit
Console#show version
4-61
Unit1
Serial number :
Hardware version :
Number of ports :24
Main power status :up
Redundant power status :not present
Agent(master)
Unit id :1
Loader version :2.1.0.3
Boot rom version :2.0.2.11
Operation code version :1.4.0.0
Console#show system
4-60
System description: 20 10/100/1000 ports + 4 Gigabit Combo ports L2/L4
managed standalone switch
System OID string: 1.3.6.1.4.1.259.6.10.51
System information
System Up time: 0 days, 0 hours, 46 minutes, and 20.53 seconds
System Name : [NONE]
System Location : [NONE]
System Contact : [NONE]
MAC address : 00-12-12-34-12-34
Web server : enable
Web server port : 80
Web secure server : enable
Web secure server port : 443
Telnet server : enable
Telnet port : 23
POST result
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
PCI Device 1 Test............PASS
PCI Device 2 Test............PASS
Switch Int Loopback test.....PASS
Done All Pass.
Console#