Accton Technology ES4512C - Manual (Page 44)

Configuring the Switch
3-6
3
Address Table 3-88
Static Addresses Displays entries for interface, address or VLAN 3-88
Dynamic Addresses Displays or edits static entries in the Address Table 3-89
Address Aging Sets timeout for dynamically learned entries 3-91
Spanning Tree 3-91
STA 3-91
Information Displays STA values used for the bridge 3-92
Configuration Configures global bridge settings for STA, RSTP and MSTP 3-95
Port Information Displays individual port settings for STA 3-99
Trunk Information Displays individual trunk settings for STA 3-99
Port Configuration Configures individual port settings for STA 3-102
Trunk Configuration Configures individual trunk settings for STA 3-102
MSTP 3-104
VLAN Configuration Configures priority and VLANs for a spanning tree instance 3-104
Port Information Displays port settings for a specified MST instance 3-107
Trunk Information Displays trunk settings for a specified MST instance 3-107
Port Configuration Configures port settings for a specified MST instance 3-108
Trunk Configuration Configures trunk settings for a specified MST instance 3-108
VLAN 3-110
802.1Q VLAN 3-110
GVRP Status Enables GVRP VLAN registration protocol 3-113
Basic Information Displays information on the VLAN type supported by this switch 3-113
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
3-114
Static List Used to create or remove VLAN groups 3-115
Static Table Modifies the settings for an existing VLAN 3-116
Static Membership Configures membership type for interfaces, including tagged,
untagged or forbidden
3-118
Port Configuration Specifies default PVID and VLAN attributes 3-119
Trunk Configuration Specifies default trunk VID and VLAN attributes 3-119
Private VLAN 3-121
Status Enables or disables the private VLAN 3-121
Link Status Configures the private VLAN 3-122
Table 3-2. Switch Main Menu
Menu Description Page