Accton Technology ES4512C - Manual (Page 213)

General Commands
4-23
4
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
end
This command returns to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration, Line Configuration, VLAN
Database Configuration, and Multiple Spanning Tree Configuration.
Example
This example shows how to return to the Privileged Exec mode from the Interface
Configuration mode:
exit
This command returns to the previous configuration mode or exit the configuration
program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode from the Global
Configuration mode, and then quit the CLI session:
Console#reload
System will be restarted, continue ? y
Console(config-if)#end
Console#
Console(config)#exit
Console#exit
Press ENTER to start session
User Access Verification
Username: