Accton Technology ES4512C - Manual (Page 349)

Spanning Tree Commands
4-159
4
spanning-tree transmission-limit
This command configures the minimum interval between the transmission of
consecutive RSTP/MSTP BPDUs. Use the no form to restore the default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
spanning-tree mst configuration
Use this command to change to Multiple Spanning Tree (MST) configuration mode.
Default Setting
• No VLANs are mapped to any MST instance.
• The region name is set the switch’s MAC address.
Command Mode
Global Configuration
Example
Related Commands
mst vlan (4-160)
mst priority (4-161)
name (4-161)
revision (4-162)
max-hops (4-163)
Console(config)#spanning-tree transmission-limit 4
Console(config)#
Console(config)#spanning-tree mst configuration
Console(config-mstp)#