Table 4-2, Configuration command modes – Accton Technology ES4512C User Manual
Page 198

Command Line Interface
4-8
4
To enter the other modes, at the configuration prompt type one of the following
commands. Use the exit or end command to return to the Privileged Exec mode.
For example, you can use the following commands to enter interface configuration
mode, and then return to Privileged Exec mode
Table 4-2. Configuration Command Modes
Mode
Command
Prompt
Page
Line
line {console | vty}
Console(config-line)#
Access
Control List
access-list ip standard
access-list ip extended
access-list ip mask-precedence
access-list mac
access-list mac mask-precedence
Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl)
Interface
interface {ethernet port | port-channel id| vlan id} Console(config-if)#
VLAN
vlan database
Console(config-vlan)
MSTP
spanning-tree mst-configuration
Console(config-mstp)#
4-159
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#