Flex-a-Lite 4116C COOLER KIT - CAMARO 2010-2011 - Manual (Page 4)

Route hoses to metal transmission cooling lines. Be mindful to leave plenty of room for installation of 12.
radiator. Remove capped ends from transmission cooling lines and attach hoses. Secure with provided
hose clamps (2ea). Trim hose lengths as necessary to provide a clean fitment. Use provided nylon tie traps
to secure routed hoses. Inspect hoses so no rubbing occurs on sharp edges.
(see Detail I)
Note: To help with sliding of hoses onto metal lines, coat ends of metal lines with clean transmission fluid.
Install radiator into vehicle. If installing Flex-a-lite radiator kit #56418 or radiator & fan kit #56488 reference 13.
instructions provide with kits or visit www.flex-a-lite.com and download the PDF.
The Flex-a-lite Limited Warranty
Flex-a-lite Consolidated, 7009-45th St. Ct. E. Fife, WA 98424, Telephone No. 253-922-2700, warrants to the original purchasing user, that all Flex-a-lite
products to be free of defects in material and workmanship for a period of 365 days (1 year) from date of purchase. Flex-a-lite products failing within
365 days (1 year) from date of purchase may be returned to the factory through the point of purchase, transportation charges prepaid. If, on inspection,
cause of failure is determined to be defective material or workmanship and not by misuse, accidental or improper installation, Flex-a-lite will replace the
product free of charge, transportation prepaid. Flex-a-lite will not be liable for incidental, progressive or consequential damages. Some states do
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives
you specific legal rights and you may have other rights, which vary from state to state. The Flex-a-lite warranty is in compliance with the Magnuson-Moss
Warranty Act of 1975.
Rev. 02-13-12 98116 Page 4 of 4
Installation instructions continued from previous page
Note: We suggest following the vehicle manufacture’s recommended transmission fluid level 14.
checking and filling procedure before operating the vehicle on the road. The transmission on this
vehicle does not come equipped with a fill tube and dipstick.
Detail I
Trim and attach hoses
to transmission cooling
lines.
Detail H
Threaded hole for
hood latch mechanism.
Threaded hole for
top cooler bracket.