Flex-a-Lite 4116C COOLER KIT - CAMARO 2010-2011 - Manual (Page 2)

From under the vehicle install “u-type” nuts (2ea) onto edge of metal support. The threads of the u-nuts will 5.
be facing downward and should be directly aligned with the holes exposed from removing the large push-in
fasteners from previous step #4.
(see Detail D)
Rev. 02-13-12 98116 Page 2 of 4
Installation instructions continued from previous page
Detail D
Detail B
Push-in fasteners
Adjustable
hood stop
Bolts 10mm
Detail C
Removal of hood latch mechanism
Assemble the brackets, channels, and cooler as shown 6.
in the exploded view. Securely attach cooler to channel.
Loosely assemble channel rails to top and bottom
brackets. The assembly needs to be loose to align the
top bracket to the radiator support.
(see Detail E)
Detail E
Cap screw - Socket HD
1/4-20 x 3/4” (4ea)
Bolt - hex HD
1/4-20 x 1-1/2” (4ea)
Gator Clip
(8ea)
Large plastic spacer
(4ea)
Top bracket
(1ea)
Bottom bracket
(1ea)
Extruded channel
(2ea)
Nut - nyloc
1/4-20 (4ea)
Bolt M8-1.25 x 30mm
(2ea)
Bolt 5/16-18 x 1-1/2”
(2ea)
Lock washer
1/4” I.D.
(4ea)
Lock washer
5/16” I.D.
(4ea)
U-nut
(2ea)