EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 45)

2-27
white dot on the video jack. Push the cable plug into
the jack until it locks into place.
c. Attach the BNC connector to an external monitor or
television.
d. Follow the CNVD-T3 startup procedures contained
in section 2.12 and ensure RS170 video format is
selected from the Main Menu as described in
paragraph 2.13.9.
e. Follow instructions provided by the manufacturer of
the monitor or television for viewing video from an
external device.
.. CAUTION ..
When the cable plug is inserted into the video
jack, it automatically locks in place. To remove it,
pull straight back on the cable plug. Do not
remove the cable plug by pulling on the cable
itself.
2.15.2 Retrieving Stored Images
. Captured images stored
in the CNVD-T3 may be downloaded to the Image Adapter
as described below. The Image Adapter has a flash memory
storage capacity of more than 400 pictures.
a. Remove the video jack plug (captive to the CNVD-
T3) from the video jack.
b. Plug the Image Adapter into the CNVD-T3 by
aligning the white dot on the cable plug with the
white dot on the video jack. Push the cable plug into
the jack until it locks into place.
c. Insert the Image Adapter’s Universal Serial Bus
(USB) connector into a free USB port on a PC or
laptop. The PC will recognize the Image Adapter as