EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 21)

2-3
2.3 MOUNTING INSTRUCTIONS
The CNVD-T3 is equipped with a throw-lever mounting
bracket that is designed for direct attachment to weapons
with a MIL-STD-1913 rail.
Figure 2-2 Throw-Lever Mounting Bracket
2.3.1 Mounting Procedures
.
WARNING ..
Be sure the weapon is CLEAR and SAFE before
proceeding.
NOTE
The CNVD-T3 may be placed at any position
(forward and aft) on the rail that is most
convenient for the operator. If, however, the
CNVD-T3 is removed from the rail, the operator
Recoil Lug Throw-Lever
Lever Lock