Figure 2-13 reticle intensity control, Figure 2-14 menu – reticle (ret) control – EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 User Manual

Page 36

Text mode
Original mode

2-18

During adjustment, a color scale is presented in the
eyepiece display as shown in Figure 2-13.

Figure 2-13 Reticle Intensity Control

Reticle intensity is adjusted by pressing the UP / DOWN
buttons to move the status bar along the + / - scale. If the
UP / DOWN buttons are not pressed within 3 seconds, the
reticle intensity scale will disappear and the CNVD-T3 will
revert to normal viewing mode.

2.13.5 Reticle (RET)

. Activating the RET menu item allows

for repositioning the reticle and toggling it on or off.

Figure 2-14 Menu – Reticle (RET) Control

Status Bar

ZOOM 1X

WHOT

CAL
RETINT

RET

PIC
REV

MCAL

RS170
HAND
EXIT