EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 34)

2-16
2.13.2 White Hot (WHOT) / Black Hot (BHOT) . Activating
the WHOT / BHOT menu item toggles between white hot
and black hot polarity modes. When in white hot mode,
objects with the hottest thermal signature will appear white,
and those with the coolest thermal signature will appear
black. In black hot mode, the reverse is true.
Figure 2-10 Menu – WHOT / BHOT
2.13.3 Calibration (CAL)
. The CNVD-T3 may be placed in
automatic or manual calibration modes as described in
section 2.13.8. Regardless of the mode selected, a
calibration of the device may be initiated at any time by
selecting the CAL menu item. A calibration should be
initiated anytime a degradation of the thermal image is
noticed.
The message “CALIBRATING” will appear as the unit
performs the calibration. Once complete, the message will
disappear and the CNVD-T3 will revert to normal viewing
mode.
Toggle with:
ZOOM 1X
WHOT
CAL
RETINT
RET
PIC
REV
MCAL
RS170
HAND
EXIT