EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 35)

2-17
Figure 2-11 Menu – Calibration (CAL)
The CNVD-T3 is equipped with an internal sensor that
detects significant changes in temperature. When this
condition occurs, the message “RECAL” will appear in the
eyepiece display, indicating that the operator should perform
a calibration of the CNVD-T3 as described above.
2.13.4 Reticle Intensity (RETINT)
. Activating the RETINT
menu item allows the operator to adjust the color of the
reticle from white, through the gray scale to black, to provide
the best contrast with the viewed image.
Figure 2-12 Menu – Reticle Intensity (RETINT)
ZOOM 1X
WHOT
CAL
RETINT
RET
PIC
REV
MCAL
RS170
HAND
EXIT
ZOOM 1X
WHOT
CAL
RETINT
RET
PIC
REV
MCAL
RS170
HAND
EXIT