EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 44)

2-26
2.15 IMAGE DOWNLOAD / VIEWING
The CNVD-T3 is supplied with an Image Adapter Cable that
is used to connect the CNVD-T3 to an external monitor for
viewing live thermal imagery; or to connect to a PC so that
captured thermal images may be downloaded. The Image
Adapter Cable is shown in Figure 2-24.
Figure 2-24 Image Adapter Cable
2.15.1 Viewing Live Imagery
. Viewing live thermal imagery
from the CNVD-T3 on an external monitor is accomplished
as follows:
a. Remove the video jack plug (captive to the CNVD-
T3) from the video jack.
b. Plug the Image Adapter into the CNVD-T3 by
aligning the white dot on the cable plug with the
USB
Connector
BNC
Connector
Cable Plug
Download
Button
LED