EOTech CNVD-T3 Clip-On Night Vision Device - Thermal 3 - Manual (Page 41)

2-23
If MCAL is selected, all calibrations after system start-up
must be initiated manually as described in paragraph 2.13.3.
If ACAL is selected, the CNVD-T3 will automatically initiate a
calibration at system start-up, every 30 minutes, and when
an ambient temperature change of at least 1°C is detected.
2.13.9 RS170 / VGA
. Activating the RS170 / VGA menu
item toggles between these two display formats. VGA
format is appropriate for high-motion viewing. RS170 format
is appropriate for all other applications. See section 2.15 for
instructions on how to connect the CNVD-T3 to an external
monitor for viewing live thermal imagery.
NOTE
When viewing the CNVD-T3 thermal image on an
external monitor, the RS170 video format must be
selected. Using the VGA video format for this
purpose will result in an extremely distorted image.
Figure 2-21 Menu – RS170 / VGA
ZOOM 1X
WHOT
CAL
RETINT
RET
PIC
REV
MCAL
RS170
HAND
EXIT