American Fibertek CX-6p-PoE - Manual (Page 43)

43
Each probe has a set of alarm and warning thresholds programmed for each of
the environmental parameters that probe measures. The user may set the alarm and
warning values, along with the actions to be taken when a value exceeds them, through
this page.
Setting Default Value Range
Warning Varies
Enabled Email Not Enabled
Not Enabled
Aux Action 1 Auxiliary-1 1-4
Duration 0 seconds Follow
10, 30,or 60 seconds
15 or 30 minutes
1 or 4 hours
Indefinitely
Aux Action 2 Auxiliary-1 1-4
Duration 0 seconds Follow
10, 30,or 60 seconds
15 or 30 minutes
1 or 4 hours
Indefinitely
Alarm Varies
Enabled Email Not Enabled
Not Enabled
Aux Action 1 Auxiliary-1 1-4
Duration 0 seconds Follow
10, 30,or 60 seconds
15 or 30 minutes
1 or 4 hours
Indefinitely
Aux Action 2 Auxiliary-1 1-4
Duration 0 seconds Follow
10, 30,or 60 seconds
15 or 30 minutes
1 or 4 hours
Indefinitely
The warning and alarm levels are preset on the probe according to the
type of values being measured by the probe. The threshold settings may be
upper or lower bounds, according to the measurement type. (For example,
Temperature and Humidity are upper bounds, while Airflow is a lower bound).