American Fibertek CX-6p-PoE - Manual (Page 26)

26
Connecting to the CX-6p-PoE
Use a Windows PC or similar computer connected to an Ethernet network. Connect the
CX-6p-PoE to the same network. Ensure that the network is one where the IP address
of the CX-6p-PoE (Default address is 192.168.0.246) is legal and not already in use.
You will need to use a browser program such as Internet Explorer with cookie
functionality enabled to connect to the CX-6p-PoE.
Type 192.168.0.246 in to the Address bar of your browser window and then press Enter.
(If you have changed the IP address of the CX-6p-PoE, you will need to type that
address in instead.) You should see a prompt for a User Name and Password to access
the unit.
The default User Name and Password are “Admin” and “Password” respectively. It is
strongly recommended that you change these when you first install and set up your unit.
Interface layout
The CX-6p-PoE web interface screens use a common design in which the screen is
divided into three sections. Across the top of the screen is a title bar which contains the
user-settable device name and device location strings, and the current time and date
setting.