American Fibertek CX-6p-PoE - Manual (Page 42)

42
Probe Setup
The Probe Setup screen will display the configuration data and environmental
readings on all probes connected to the CX-6p-PoE. A CX-6p-PoE can have up to two
probes connected to it.
Each probe has a unique serial number associated. This serial number will be
displayed along with the type of the probe. The time and date at which the probe’s data
was last changed will also be displayed along with the login name which was used when
that change was made.
Each probe has a user-assigned name which can be up to 16 characters long.
This name will be used when data and alerts from the probe are sent to attached Pilot
servers and in notification email messages.
A button is provided to set a reference airflow point for probes which have an
airflow sensing function. When this button is pressed the attached probe will take the
current airflow reading as a 100% reference level. All following airflow readings will be a
percentage of the reference airflow level.