Ag Leader Intellislope CAN/GPS Simulator Operation Guide - Manual (Page 7)

PN: 2006008 Rev. A June 2014 Page 7 of 7
Troubleshooting continued.
Problem: MSVCP110.dll system error message:
Solution: 1. This error message pertains to a missing component of the Microsoft C++ distribution
package. The missing part can be found here .
2. Install the component then re-install the CAN simulator.
Problem: No CAN communication with the display
Solution: 1. Ensure the proper connections on the CAN simulator are made
2. Cycle power on the display to restore CAN communication
3. Restart the CAN simulator program and reopen the modules