Ag Leader PFadvantage Rawson Accu-Rate Direct Drive Quick Reference Sheets - Manual (Page 9)

PF3000 Pro – Quick Reference Setup Instructions for Direct Drive of Accu-Rate drive on a fertilizer applicator – March 2002
Revision 3 9 of 9 PN: 2002831-16
Turning Drive On/Off
Use the external on/off toggle switch (provided by Rawson) to turn the
drive on or off. Rawson does offer an optional Whisker Switch (Part Number:
300779) for installing on the implement. When the drive is on, the green light
on the switch located on the lower right of the front panel of the Pro will be on.
When the drive is off, the red light will be on.
Using jump start speed
When you start applying from a stationary position, you should push and hold
the master on/off toggle switch in the fully on or forward position. The Pro
will set the ground speed equal to the jump start speed set in step 2 (see other
side of sheet) until the speed from the radar gun or GPS gets above the jump
start speed. You will only have to hold the switch down for a short time.