Server fault indications flowchart – HP ProLiant ML310 G2 Server User Manual
Page 98
98
HP ProLiant ML310 Generation 2 Server User Guide
Server Fault Indications Flowchart
Symptoms:
•
Server boots, but a fault event is reported by Insight Management Agents (on
page
•
•
•
•
•
Server boots, but the internal health LED is red or amber
Possible causes:
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item Refer
to
1
"Management Agents (on page
2 •
"Integrated
Management Log (on page
•
"Event List Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (
3
Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
4
System Management Homepage
)
5
"Power-On Problems ("Power-On Problems Flowchart" on page
6
•
"Hard Drive Problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (
•
Server maintenance and service guide, located on the
Documentation CD or the HP website
(
)
7
"HP Insight Diagnostics (on page