Management tools – HP ProLiant ML310 G2 Server User Manual
Page 67
Server Software and Configuration Utilities
67
The intuitive graphical user interface of the Altiris Deployment Solution console
provides simplified point-and-click, and drag-and-drop operations that enable
you to deploy target servers remotely, perform imaging or scripting functions,
and maintain software images.
For more information about the RDP, refer to the HP ProLiant Essentials Rapid
Deployment Pack CD or refer to the HP website
(
Re-Entering the Server Serial Number and Product ID
After you replace the system board, you must re-enter the server serial number
and the product ID.
1. During the server startup sequence, press the F9 key to access RBSU.
2. Select
the System Options menu.
3. Select Serial Number. The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded
into the system during the manufacturing process and
should NOT be modified. This option should only be used
by qualified service personnel. This value should always
match the serial number sticker located on the chassis.
4. Press
the
Enter key to clear the warning.
5. Enter the serial number and press the Enter key.
6. Select
Product ID.
7. Enter the product ID and press the Enter key.
8. Press
the
Esc key to close the menu.
9. Press
the
Esc key to exit RBSU.
10. Press the F10 key to confirm exiting RBSU. The server will automatically
reboot.
Management Tools
List of Tools: