HP ProLiant ML310 G2 Server - Manual (Page 50)

50 HP ProLiant ML310 Generation 2 Server User Guide
2. Install the hard drive.
3. Determine the status of the hard drive from the hot-plug hard drive LEDs
("Hot-Plug SCSI Hard Drive LED Combinations" on page 18 , "Hot-Plug
SCSI Hard Drive LEDs" on page 17 ).
4. Resume normal server operations.
SAS Controller
To install the component:
1. Power down the server.
2. Remove the access panel ("Removing the Access Panel" on page 22 ).
3. Remove the expansion slot cover ("Expansion Slot Cover" on page 54 ).