HP ProLiant ML310 G2 Server - Manual (Page 43)

Hardware Options Installation 43
3. Open the DIMM slot latches.
4. Install the DIMM.
5. Install the access panel ("Removing the Access Panel" on page 22 ).
Hard Drive Options
The server supports non-hot-plug SCSI hard drives, hot-plug SAS hard drives,
and hot-plug SATA hard drives. Hot-plug SATA hard drives are interchangeable
with hot-plug SAS hard drives when the optional SAS controller ("SAS
Controller" on page
50 ) is installed.
Hard Drive Model Drives Supported Additional Required
Components
Non-hot-plug SATA SATA N/A
Non-hot-plug SCSI SCSI N/A
Hot-plug SATA/SAS SATA, SAS SAS controller required
for hot-plug SAS hard
drive