beautypg.com

Non-hot-plug scsi hard drive – HP ProLiant ML310 G2 Server User Manual

Page 46

background image

46

HP ProLiant ML310 Generation 2 Server User Guide

2. Install the drive cage into the chassis, and secure with the six (6) Torx

screws.

3. Connect the data and power cables to the rear of the installed hard drive.

Non-Hot-Plug SCSI Hard Drive

To remove the component:

1. Power down the server.

2. Remove the access panel ("Removing the Access Panel" on page

22

).

3. Disconnect the power and data cables from the rear of the hard drive.

See also other documents in the category HP Computer hardware: