beautypg.com

Non-hot-plug sata hard drive – HP ProLiant ML310 G2 Server User Manual

Page 44

background image

44

HP ProLiant ML310 Generation 2 Server User Guide

Non-Hot-Plug SATA Hard Drive

To remove the component:

1. Power down the server.

2. Remove the access panel ("Removing the Access Panel" on page

22

).

3. Disconnect the power and data cables from the rear of the hard drive.

4. Remove the drive cage from the chassis.

5. Remove the six Torx screws that secure the drive cage to the chassis.

See also other documents in the category HP Computer hardware: