beautypg.com

Removing the cd-rom drive – HP ProLiant ML310 G2 Server User Manual

Page 51

background image

Hardware Options Installation

51

4. Install the SAS controller, and press it down to seat.

5. Disconnect the SAS cable from the system board and connect it to the SAS

controller.

6. Be sure the SAS cable is properly connected to the SAS controller and drive

backplane.

Removing the CD-ROM Drive

Before installing the drive option kit, the CD-ROM drive must be removed.

To remove the component:

1. Power down the server.

2. Remove the access panel ("Removing the Access Panel" on page

22

).

3. Disconnect the cables from the rear of the CD-ROM drive.

See also other documents in the category HP Computer hardware: