beautypg.com

Print fax confirmation reports, Print fax error reports – HP Officejet J4680 User Manual

Page 65

background image

Print fax confirmation reports

If you require printed confirmation that your faxes were successfully sent, follow these
instructions to enable fax confirmation before sending any faxes. Select either On Fax
Send
or Send & Receive.
The default fax confirmation setting is Off. This means that a confirmation report is not
printed for each fax sent or received. A confirmation message indicating whether a fax
was successfully sent appears briefly on the control-panel display after each
transaction.

To enable fax confirmation
1.
Press Setup.
2. Press the right arrow to select Print Report, and then press OK.
3. Press the right arrow to select Fax Confirmation, and then press OK.
4. Press the right arrow to select one of the following, and then press OK.

Off

Does not print a fax confirmation report when you send and receive
faxes successfully. This is the default setting.

On Fax Send

Prints a fax confirmation report for every fax you send.

On Fax Receive

Prints a fax confirmation report for every fax you receive.

Send & Receive

Prints a fax confirmation report for every fax you send and receive.

TIP: If you choose On Fax Send or Send & Receive, and scan your fax to
send from memory, you can include an image of the first page of the fax on the
Fax Sent Confirmation report. Press Setup, press Fax Confirmation, and
then press On Fax Send again. Select On from the Image on Fax Send
Report
menu.

Print fax error reports

You can configure the device so that it automatically prints a report when there is an
error during transmission or reception.

To set the device to print fax error reports automatically
1.
Press Setup.
2. Press the right arrow to select Print Report, and then press OK.
3. Press the right arrow to select Fax Error, and then press OK.
4. Press the right arrow to select one of the following, and then press OK.

Send & Receive

Prints whenever a fax error occurs. This is the default setting.

Off

Does not print any fax error reports.

On Fax Send

Prints whenever a transmission error occurs.

On Fax Receive

Prints whenever a receiving error occurs.

Use reports

61

This manual is related to the following products: