HP Deskjet 6943 Printer User Manual
Page 125
Binding margin is in the wrong place
1.
Open the
dialog box.
2.
Select the Two-Sided Printing pane.
3.
Verify that the correct binding has been selected:
–
The Book button is selected for binding along the side.
–
The let button is selected for binding along the top.
Only one side of the page prints when the two-sided printing option is enabled
Verify that the following conditions exist:
●
The
are set in both the printer software and the software
program that you are using.
●
The photo paper is not curled, if you are printing on two-sided photo paper. Photo
paper should be flat before printing. See
storing and handling photo paper
for more
information.
●
The paper size selected in the
dialog box is supported by the duplexer.
●
The paper type selected in the Paper Type/Quality pane is supported by the
duplexer.
See the duplexer specifications for a list of supported paper types and sizes.
Auto Two-Sided Print Accessory with Small Paper Tray specifications
Dimensions when attached to printer
219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep
Duplexing specifications
For duplexing specifications, including skew, media weight, and media sizes for paper
fed into the printer through the printer In tray, see the
.
Small paper tray specifications
Media thickness: 7-12 mils
Media sizes:
●
Size range:
–
Width: 81.3 to 106 mm (3.2 to 4.17 in)
–
Length: 116.8 to 304.8 mm (4.6 to 12 in)
●
Cards:
–
10x15 cm, 10x15 cm with tab
–
4x6 in, 4x6 in with tab
–
A6, 105x148 mm
–
Index card, 4x6 in.
–
L, 89x127 mm
●
Photo paper:
–
10x15 cm, 10x15 cm with tab
–
4x6 in, 4x6 in. with tab
User's guide
123