HP LaserJet 3200 All-in-One Printer series - Manual (Page 230)

228
Chapter A - Specifications EN
Product specifications
This section provides the following specifications for the HP LaserJet
3200 product:
l Overall specifications
l Faxing specifications
l Printing specifications
l Copying specifications
l Scanning specifications
Overall specifications
Physical
Height 10.8 in (272 mm)
Depth 15.4 in (390 mm)
Width 15.1 in (384 mm)
Weight (cartridge installed) 23.4 lb (10.6 kg)
Electrical
Power requirements 100 to 127 volts +/-10% 50 to 60 hertz (for 110 volt units)
220 to 240 volts +/-10% 50 hertz (for 220 volt units)
Power consumption Continuous copy mode: 135 watts
Idle mode: 7 watts
Minimum recommended circuit capacity 4.2 amps (110 volts)
2 amps (220 volts)
Idle power 7 watts
Environmental
Operating (working or standby) Temperature: 15° to 32.5° C
Humidity: 10% to 80% relative humidity (no condensation)
Storage (unplugged) Temperature: -20° C to 40° C (toner cartridge) -20° C to 60°
C (device)
Humidity: 10% to 90% relative humidity (no condensation)
Location Place product on sturdy, level surface in a well-ventilated
area.
Memory
Memory 8 megabytes (MB) (HP LaserJet 3200 and 3200se)
16 MB (HP LaserJet 3200m)