HP LaserJet 3200 All-in-One Printer series - Manual (Page 167)

EN Resolving copying problems
165
Either light or
dark vertical
lines run
through the
copy.
The scanner glass might be dirty. Clean and recalibrate the scanner. See
“Cleaning the scanner path” on page 213
and “Recalibrating the scanner” on
page 216.
See the “Resolving image quality
problems” on page 181 section for more
information.
Copies are too
light or too
dark.
The contrast might not be set correctly.
The print cartridge might need to be
replaced.
Adjust the contrast setting. See “Using the
Contrast button to adjust the contrast for
the current fax or copy job” on page 122.
Or, try adjusting the print density setting
from the control panel.
Replace the print cartridge. See “Ordering
parts” on page 257.
Copy quality of
an image or
text is poor.
The resolution might not be set correctly.
The scanner path might be dirty.
See “Adjusting copy quality for the current
job” on page 123.
See “Cleaning the scanner path” on
page 213.
Problem Cause Solution