HP 3PAR System Reporter Software - Manual (Page 211)

Table 81 Common Performance Metrics for a Sample Row
SQL Expression Metric
CASE WHEN d_now > 0 THEN d_rcount * 1000000.0/d_now ELSE 0 END Read IOPs/s
CASE WHEN d_now > 0 THEN d_wcount * 1000000.0/d_now ELSE 0 END Write IOPs/s
CASE WHEN d_now > 0 THEN (d_rcount + d_wcount) * 1000000.0/d_now
ELSE 0 END
Total IOPs/s
CASE WHEN d_now > 0 THEN d_rbytes * 1000.0/d_now ELSE 0 END Read KBytes/sec
CASE WHEN d_now > 0 THEN d_wbytes * 1000.0/d_now ELSE 0 END Write KBytes/sec
CASE WHEN d_now > 0 THEN (d_rbytes + d_wbytes)* 1000.0/d_now ELSE
0 END
Total KBytes/sec
CASE WHEN d_rcount > 0 THEN d_rticks / (d_rcount * 1000.0) ELSE 0
END
Read service time
(millisec)
CASE WHEN d_wcount > 0 THEN d_wticks / (d_wcount * 1000.0) ELSE 0
END
Write service time
(millisec)
CASE WHEN (d_rcount + d_wcount) > 0 THEN (d_rticks + d_wticks) /
((d_rcount + d_wcount) * 1000.0) ELSE 0 END
Total service time
(millisec)
CASE WHEN d_rcount > 0 THEN d_rbytes / (d_rcount * 1000.0) ELSE 0
END
Read IO Size (KBytes)
CASE WHEN d_wcount > 0 THEN d_wbytes / (d_wcount * 1000.0) ELSE 0
END
Write IO Size (KBytes)
CASE WHEN (d_rcount + d_wcount) > 0 THEN (d_rbytes + d_wbytes) /
((d_rcount + d_wcount) * 1000.0) ELSE 0 END
Total IO Size (KBytes)
CASE WHEN qlen > 0 THEN qlen ELSE 0 END Queue length
The check for qlen > 0 is because qlen < 0 indicates that qlen is invalid for that sample.
AVG(CASE WHEN ((d_now > 0) AND (d_busy < busy)) THEN (d_busy *
100.0/d_now) ELSE 0 END)
Busy%
Service Time Histogram Buckets
The service time range corresponding to each of the rhist and whist buckets depends on the version
of the HP 3PAR OS (os_rev column in the system table, see
“The system Table” (page 196) ). For
os_rev prior to 2.2.2, the nth bucket (rhistn and whistn) correspond to service times from the
previous bucket to (2n*4.096/mhz) millisec where mhz is the mhz column in the system_3 table
(see
“The system Table” (page 196) ). This means that service time histograms from systems with
different CPU frequencies could not be correctly aggregated. Beginning with the 2.2.2 release,
the buckets were made independent of the CPU frequency, and the nth bucket (rhistn and whistn)
corresponds to service times from the previous bucket to (2n-7) millisec.
IO Size Histogram Buckets
There are 16 IO Size buckets correspond IO sizes 512 bytes to 16 MiBytes. The nth bucket holds
the count for IO Sizes from the previous bucket’s max size to 512 * 2n bytes.
The statpd Table
The statpd__4 table holds physical disk (PD) performance data samples.
The Sample Data and Inventory Tables 211