HP 3PAR System Reporter Software - Manual (Page 155)

Specify this value to include RAID 1 logical disks.
5
Specify this value to include RAID 5 logical disks.
6
Specify this value to include RAID 6 logical disks.
example:
The following example specifies inclusion of all logical disks regardless of RAID level:
&selraidtype=
The following example includes RAID 1 and RAID 5 logical disks only:
&selraidtype=1&selraidtype=5
selsys
Use the selsys option to select a particular storage system.
values:
Specify one or more of the following:
--All Systems--
(Default). Does not exclude storage servers based on their system names.
This value consists of a storage server system name.
example:
The following example shows two ways to specify that storage servers should not be excluded
based on their names:
&selsys=
OR
&selsys=--All%20Systems--&
The following example includes data from InServ1:
&selsys=
InServ1
selvv
Use the selvv option to specify virtual volumes according to their names.
values:
Specify one or more of the following:
--All VVs--
(Default). Does not exclude virtual volumes based on their names.
This value consists of a virtual volume name.
Report Options 155