Automatic paper sensing (auto-sense mode), Auto-sense settings – HP LaserJet Enterprise 500 Color MFP M575 User Manual

Page 57

The control panel shows the tray’s paper type

and size. If the configuration is not correct,

follow the instructions on the control panel to

change the size or type.

For custom-size paper, you need to specify the

X and Y dimensions for the paper

Automatic paper sensing (auto-sense mode)

The automatic paper type sensor functions when a tray is configured to the

Any Type

or plain type

setting.

After it has picked up paper from the tray, the product can detect overhead transparencies, paper

weight, and gloss level.

For more control, select a specific paper type for the job or configure the tray for a specific paper type.

Auto-sense settings

From the Home screen on the product control panel, scroll to and touch the

Administration

button.

Open the following menus:

●

General Settings

●

Print Quality

●

Auto Sense Behavior

Select one of the auto-sense modes.

Expanded sensing

NOTE:

This is the default setting for all

trays.

For the first few sheets of paper that it picks up from the tray, the product detects
light paper, plain paper, heavy paper, glossy paper, tough paper, and
transparencies. The product assumes the rest of the pages are of the same type.

Transparency only

The product distinguishes between transparencies and non-transparencies. This
setting provides the fastest printing, but for some paper types it might reduce print
quality.

ENWW

Optional Tray 3