HP LaserJet Enterprise 500 Color MFP M575 - Manual (Page 180)

Configure required fax settings
You must configure certain settings before you can use the fax feature. If these settings are not
configured, the fax icon is unavailable. These settings include:
● Country/region
● Date/Time
● Company Name
● Fax Number
● Dialing Prefix (optional)
This information is used in the fax header, which is for printing on all outgoing faxes.
NOTE: When first installed, the fax accessory might read some of these settings from the product;
therefore, a value might already be set. Check the values to verify that they are correct.
NOTE: In the U.S. and many other countries/regions, setting the date, time, country/region, phone
number, and company name is a legal requirement for fax.
Fax Setup Wizard
The Fax Setup Wizard guides you through a step-by-step procedure to configure fax settings that are
required to use the fax feature. If the settings are not configured, the fax feature is disabled.
The first time the product is turned on with a fax accessory installed, access the Fax Setup Wizard by
following these steps:
1. From the Home screen on the product control panel, touch the Initial Setup button.
2. Touch the Fax Setup Wizard menu.
3. Follow the steps in the Fax Setup Wizard to configure the required settings.
4. When the Fax Setup Wizard finishes, the option to hide the Initial Setup button appears on the
Home screen.
Access the Fax Setup Wizard after initial setup through the control panel by following these steps:
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
● Fax Settings
● Fax Send Settings
● Fax Send Setup
● Fax Setup Wizard
3. Follow the steps in the Fax Setup Wizard to configure the required settings. Fax setup is complete.
166 Chapter 8 Fax ENWW