HP LaserJet Enterprise 500 Color MFP M575 User Manual

Page 33

Click the Close button when the installation is complete.

NOTE:

Complete the following steps after completing the printing-system software installation

only if you did not add a printer when running the installer.

At the computer, open the Apple menu, click the System Preferences menu, and then click
the Print & Fax icon (OS X v10.5 and 10.6) or the Print & Scan icon (OS X v10.7).

Click the plus symbol (+).

Use either Bonjour (default browser) or IP Printing for the network connection.

NOTE:

Bonjour is the easiest and best method to use if the product is installed on your local

network.

IP Printing must be used to install the product on a different network.

If you are using Bonjour, complete the following steps:

a. Click the Default Browser tab.

b. Select the product from the list. The software verifies that the product is connected to the

network. The Print Using field is automatically populated with the correct PPD for the

product.

NOTE:

If you are on a network that has more than one product, print a configuration page

and match the Bonjour Printer Name to the name on the list to identify the product that you

are installing.

NOTE:

If the product does not appear in the list, verify that the product is on and

connected to the network, then try turning the product off and then on again. If the product

PPD is not in the Print Using drop-down list, turn the computer off and then on again, and

then restart the setup process.

Click the Add button to complete the setup process.

If you are using the IP Printing method, complete the following steps:

a. Click the IP Printer tab.

b. Choose HP Jet Direct – Socket from the Protocol drop-down menu. This is the

recommended setting for HP products.

Type the IP address into the Address field on the add printer screen.

d. The Name, Location, and Print Using information are automatically filled in. If the

product PPD is not in the Print Using field, turn the computer off and then on again, and

then restart the setup process.

ENWW

Connect the product to a network by using a network cable and install the software (Mac)