HP LaserJet Enterprise 500 Color MFP M575 - Manual (Page 260)

3. Clean the main scanner glass, the document-
feeder glass (the small strip of glass on the left
side of the scanner), and the white foam
backing. Use a soft cloth or sponge that has
been moistened with nonabrasive glass
cleaner. Dry the glass and white plastic
backing by using a chamois or a cellulose
sponge to prevent spotting.
CAUTION: Do not use abrasives, acetone,
benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the product; these
can damage the product. Do not place liquids
directly on the glass or platen. They might seep
and damage the product.
NOTE: If you are having trouble with streaks
on copies when you are using the document
feeder, be sure to clean the small strip of glass
on the left side of the scanner.
4. Connect the power cable to an outlet, and
then press the power button to turn on the
product.
Calibrate the scanner
If the copied image is not positioned correctly on the page, calibrate the scanner.
NOTE: When using the document feeder, make sure to adjust the guides in the input tray so they are
against the original document.
1. From the Home screen on the product control panel, scroll to and touch the Device Maintenance
button.
2. Open the following menus:
● Calibration/Cleaning
● Calibrate Scanner
246 Chapter 10 Solve problems ENWW