HP PSC 2350 All-in-One Printer User Manual
Page 57

Tip
If the output is not borderless, then set the paper size to
5x7 Borderless
or
4x6 Borderless
, set the paper type to
Photo Paper
, set the
Photo
enhancement, and then try again.
For more information on how to set the paper size, see
.
For information on how to set the paper type, see
For information on how to set the
Photo
enhancement, see
Copy a 10by 15cm (4by 6inch) photo onto a full-size
page
You can use the
Fill Entire Page
setting to enlarge or reduce your original to fill the
printable area of the paper size loaded in the paper tray. In this example,
Fill Entire
Page
is used to enlarge a 10 by 15 cm (4 by 6 inch) photo to create a full-size
borderless copy. When copying a photo, you might want to use the photo print cartridge
for superior print quality. With the tri-color and photo print cartridges installed, you have a
six-ink system. For more information, see
.
Note
In order to achieve a borderless print without changing the proportions of the
original, the HP all-in-one might crop some of the image around the margins. In
most cases, this cropping will not be noticeable.
To copy a photo onto a full-size page from the control panel
1
Load letter or A4 photo paper in the paper tray.
Warning
In order to make a borderless copy, you must have photo paper
(or other specialty paper) loaded. If the HP all-in-one detects plain paper in
the input tray, it will not make a borderless copy. Instead, your copy will
have borders.
2
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3
Press
Copy Menu
to display the
Copy Menu
.
4
Press
2
, and then press
3
.
This displays the
Reduce/Enlarge
menu and then selects
Fill Entire Page
.
5
Press
Start Copy Color
.
Chapter 7
54
HP PSC 2350 series all-in-one
Use
the copy features